Skip to content

Moog Subsequent 37 firmware

Moog active Device launched 2017
Get alerts for new Subsequent 37 firmware
Free · one message per release

Latest firmware

1.2.0
Download firmware from moogmusic.com · needs Bome SendSX

Last checked 27 Oct 2026

What you get with a free account

  • An alert the day a new Subsequent 37 firmware ships, by email, Telegram or push
  • Your whole rig in one place, with the version each device is on
  • Used and new Reverb prices for your gear
  • A public rig page to share, if you want one

We check Moog's official download page for the Moog Subsequent 37 every day. One message per release. No spam, no newsletter.

Sign in, it’s free →

How to update the Moog Subsequent 37

To update the firmware, connect the Subsequent 37 to the computer via USB. Use a SysEx Librarian application (Bome SendSX for Windows or SysEx Librarian for Mac). Set transmission speed to 50% (or lower if issues occur). Load and send the four .syx files in the correct order. Avoid using USB hubs. The process may take more than 15 minutes. The synthesizer will restart automatically when done. You can verify firmware version by powering on the Subsequent 37 while holding the CURSOR key. Firmware update cannot be performed via MIDI DIN.

What you need

Bome SendSX (Windows), SysEx Librarian (Mac) — the software Moog uses to load firmware onto the Moog Subsequent 37. Download links below.

Just for reference. For complete and up-to-date instructions, always refer to the manufacturer's official firmware page.

Drivers & software for the Moog Subsequent 37

The Moog Subsequent 37 is updated with Bome SendSX (Windows), SysEx Librarian (Mac), published by Moog.

Download Bome SendSX (Windows), SysEx Librarian (Mac) from Moogopens in a new tab — moogmusic.com

Sign in to see Reverb prices →

Moog Subsequent 37 firmware update history

Changelogs summarised from the manufacturer's release notes.

1.2.0

Tracked in 5 rigs on FW//RADAR.

Moog Subsequent 37 firmware FAQ

What is the latest firmware for the Moog Subsequent 37?

The latest firmware for the Moog Subsequent 37 is version 1.2.0. FW//RADAR last checked Moog's official page on 27 Oct 2026.

How do I update the Moog Subsequent 37?

To update the firmware, connect the Subsequent 37 to the computer via USB. Use a SysEx Librarian application (Bome SendSX for Windows or SysEx Librarian for Mac). Full instructions on Moog's official firmware page.

What software do I need to update the Moog Subsequent 37?

You need Bome SendSX (Windows), SysEx Librarian (Mac), available from Moog's support site.

Where can I download Moog Subsequent 37 firmware and drivers?

Directly from Moog's official firmware page — FW//RADAR links to the source and never hosts firmware files. Official firmware page →

Where can I find the Moog Subsequent 37 manual?

The official Moog user manual is a PDF hosted on cdn.inmusicbrands.com. Moog Subsequent 37 user manual (PDF) →

View on Reverb →