Elektron Model:Samples firmware

Improvements: Added support for running the device on battery power using the Power Handle accessory and added a new BATTERY CONFIG menu with various battery-power related settings in the CONFIG menu. Added a battery indicator to the UI. Added an additional step to switch on the device when running on batteries to prevent unintentional power up. You then switch on the device by pressing and holding MAIN VOLUME for a second and then turn MAIN VOLUME clockwise four ticks. General USB Audio improvements. Prevented MIDI feedback problems that could occur when pressing [STOP] twice. Improved the visual feedback from the [REC] key in LIVE RECORDING mode. Tracks set to MOUT now also forwards the incoming note data on the AUTO channel from external MIDI controllers to the MIDI OUT port for control of an external device. Bug fixes: A fixed (non-synced) MUL setting on one LFO could, in some circumstances, affect the tempo of the other LFO. When in LIVE RECORDING mode and using an external keyboard, only the first played note’s velocity and micro timing was recorded when playing legato. The following notes instead got the default values. The device did not listen to the MIDI CC All Notes Off. The USB Class Compliant audio from the computer to the Elektron device could sometimes be silenced. Parameter locked values were not displayed if another key was pressed immediately after the held [TRIG] key. Pattern change was ignored if the [PATTERN] key was released before the [TRIG] keys. When loading the STOCK project from the PROJECT MANGER after a factory reset, there was no sound from any samples assigned to tracks in pattern banks B-F. Notes sent from an external MIDI controller were incorrectly transposed +2 octaves. Some menu parameters graphics were, under certain circumstances, not visually updated after changing patterns during playback. [...]