This firmware introduces full Milan Certification (Milan Version 1.1).
Fixes:
- Implemented support for all 16 streams and 128 channels at 176.4 kHz and 192 kHz to comply with the Milan specification.
- Stopped "fixing" stream formats at boot to align with the audio unit sample rate.
- Fixed the listener state machine to be Milan compliant.
- Fixed AAF reservation sizes to use the formula from the Milan specification.
- Corrected the Controller Available command sequence ID for retried commands to comply with the Milan specification.
- Implemented unsolicited entity unlock notifications upon lock timeout.
- Improved interoperability with legacy MOTU AVB devices running firmware 1.4.8.
- Make sure AAF transmitted timestamps are aligned to the 48 kHz "grid" when locked to CRF.
- Added a mode enabling the integrated controller to keep the talker presentation offset sample-aligned when changing sample rates.
- Added front panel menu items to recall Milan Default settings (AAF/CRF 2.0 ms) or MOTU Default settings (AM824 0.625 ms).
- Fixed listener and talker state reporting via unsolicited GET_STREAM_INFO messages.
- Fixed issues with talker withdrawal and redeclaration.
- Improved CRF handling, including freewheeling transitions and timestamp correctness.
- Implemented all Milan required counters.
- Implemented support for channel naming and mapping via ATDECC commands.
- Fixed ordering of ATDECC responses and notifications.
- Ensured different device models advertise distinct model IDs over 1722.1.
- Send unsolicited notifications when stream mappings are changed with CueMix Pro.
- Properly report media clock lock state.
Install the MOTU Pro Audio v2 software (driver and CueMix Pro) from the 16A Getting Started or downloads page: on a Mac drag CueMix Pro to Applications, then install or update the driver from CueMix Pro's Discovery tab; on Windows run the installer. Connect the 16A, launch CueMix Pro, go to the Discovery tab and click your device, then open the Device tab and find the Firmware section. Click Update Now (or Open Updater, then Update Now) and confirm. After about a minute the interface reboots with all settings kept. Keep the driver, CueMix Pro and the firmware updated together.
What you need
CueMix Pro — the software MOTU uses to load firmware onto the MOTU 16A (2025). Download links below.
Firmware Update 2.2.11+603f62438ded
Fixes:
• Fix post EQ bus meters.
• Fix delay line metering when delay lines are patched to other delay lines.
• Fix an issue that could cause the CMP UI to become out of sync with the device state in heavy network traffic conditions.
Firmware Update 2.2.10+e4e48fcec621
New features:
• Added the ability to set static IPv4 address on front panel.
Fixes:
• Fixed ABC patch ordering to avoid increase in loudness when patching to and from ABC monitor.
New Features:
• Added the ability to disable host volume controls in the front panel Advanced menu.
Fixes:
• Improved ADAT stability issues introduced in 2.2.8.
• Fixed an issue with Line Input 1 gain recall.
Version 2.2.8 — 10 Dec 2025
New Features:
• Implement delay compensation (4 Banks of 16 Channels, 2ms of delay).
• [Mac] Add host volume controls (Class Mode and MOTU Driver).
• [Mac] Report custom device name during enumeration (USB + Thunderbolt).
Fixes:
• Fix property serialization (allow saving AVB Listener state in host presets).
• Fix packet buffer leak in legacy datastore POST request handler.
• Allow the ATDECC proxy to forward commands targeting the controller to the controller.
• Correct the wSpeedsSupported field in the USB BOS descriptor.
• Fix gPTP issue that could prevent FollowUp messages from being transmitted when the device becomes Grandmaster.
• Set S/MUX bit in ADAT stream at 2x sample rates.
Version 2.2.6 — 4 Sep 2025
Fixes:
• Fixed issue with insert return handling (LCD and Functional).
• Fixed 1px gap in input meter background.
• Implemented routable ABC speaker select.
Version 2.2.4 — 4 Aug 2025
Fixes:
• Improved Thunderbolt startup synchronization to resolve an issue that could cause audio input glitches.
• Fixed a bug that caused the device to incorrectly report "freewheeling" when it was not.
• Implemented glitchless grandmaster switching, allowing seamless transition by temporarily freewheeling during grandmaster changes.
• Set AAF header to report bit depth as 32-bits.
• Fix MVRP packet parsing issue that could prevent device from receiving further network packets.
• Improvement where the device can interrupt the host early when starting audio over Thunderbolt. Allows Mac to startup audio ~340ms faster.
Version 2.2.2 — 21 Jul 2025
New Features:
• Added a new clock freewheeling indicator in the clock section of the front panel LCD.
Fixes:
• Eliminated a format error with Media Clock Stream when changing from 1x to 2x sample rates.
• Improved buffer muting when network audio streams go away.
• Always join VLAN 2 on MVRP.
Version 2.2.1 — 1 Jul 2025
New Features:
• Added new ‘Advanced’ front panel menu item with two sub-menu items: ‘DAC Filter’ and ‘Panel Lockout’.
• Three new DAC Filter options include: Minimum Phase (Default), Linear Phase Fast, and Linear Phase Slow.
• New Panel Lockout feature allows you to temporarily disable all front panel controls. The Lockout feature can be turned off from the front panel by holding the BACK button and turning the MENU knob clockwise. It can also be turned off in the Device tab of CueMix Pro.
• Added support for the ‘Become Master Clock’ button in the web app of earlier-generation MOTU AVB interfaces and the new ‘Become AVB Media Clock Reference’ button in CueMix Pro 1.1.1 or later. When working with earlier-generation MOTU AVB interfaces, this functionality (for both buttons) requires firmware version 1.4.7+99954 (or later). For instructions on how to update earlier-generation AVB interface firmware, see this tech note.
• Add support for Media Clock Stream, that supports both Milan CRF and AM824 stream formats
Fixes:
• Fix for bug with AVB MAAP conflict handling.
• Improvement to MSRP handling of destination MAC conflicts.
• Fix to unsolicited ATDECC clock source change notifications.
• Fix to MDNS ADP and AEC descriptor MODEL_ID field.
• Fix for display of long preset and device names on-screen.
• Preset saving now shows “Busy” until preset is fully done saving.
• Fix for bug with PTP handling when Pdelay Response Followup is handled before the Pdelay Response message.
Version 2.1.6 — 13 May 2025
Fixes:
• Fixed a bug with preset recall.
Tracked in 1 rig on FW//RADAR.
MOTU 16A (2025) firmware FAQ
What is the latest firmware for the MOTU 16A (2025)?
The latest firmware for the MOTU 16A (2025) is version 2.3.0, released on 1 Jul 2026. FW//RADAR last checked MOTU's official page on 16 Nov 2026.
How do I update the MOTU 16A (2025)?
Install the MOTU Pro Audio v2 software (driver and CueMix Pro) from the 16A Getting Started or downloads page: on a Mac drag CueMix Pro to Applications, then install or update the driver from CueMix Pro's Discovery tab; on Windows run the installer. Connect the 16A, launch CueMix Pro, go to the Discovery tab and click… Full instructions on MOTU's official firmware page.
What software do I need to update the MOTU 16A (2025)?
You need CueMix Pro, available from motu.com.
Where can I download MOTU 16A (2025) firmware and drivers?
Directly from MOTU's official firmware page — FW//RADAR links to the source and never hosts firmware files. Official firmware page →