Roland P-6 firmware

Additional Functions / Functionality Improvements / Specification changes When you press the [KYBD] button while holding down a keyboard button, the sound will be held. Improves the frequency of updating the status display of Grain displayed on Step Buttons when the [GRANULAR] button is pressed within the VOICE page. When the Start Position, Size, Loop Size of the sample pad and the Head Position and Grain Size of the Granular are changed using the [TEMPO/VALUE] knob, the displayed time is changed to the third decimal place or lower for a fixed amount of time. When set to Mono/Poly:Mono, Gate:Off, Loop:On, if you press another Note while holding down a Note, it will switch to the new Note and maintain loop playback. When pressing the Sample Pad while holding down the Step Button, using the velocity input shortcut operation, the display of "Mid" is changed to "Medi" (Medium). Changed the maximum value of [OCT+] to 5. When "Stop Behavior:Cut" is set, the change is made to stop all samples when switching patterns during playback before playing the next pattern. When [KYBD] button is lit, the Keyboard button that continues to play at "Gate:Off" and "Loop:On" is changed to indicate flashing even when the keyboard button is released. If the setting for "MIDI Clock Sync" is set to MIDI or Sync, when the MIDI Clock or Sync Clock is not input and [START/STOP] is pressed, the change is made to indicate [＞] (PLAY) button that the clock is waiting for input by flashing. Changed the MIDI CC so that it can be received by both Auto Channel and Granular Ch. Improves the ability to follow when changing the MIDI Channel settings. When executing CLEAR ALL, Notes/Motions of all steps are always deleted. Reduced noise at startup. Reduced noise when the Headset Microphone is unplugged. Reduced delay of playback timing immediately after pattern playback starts. Improved tracking when editing Microtiming. [KYBD] +[OCT+] selects only Reload / Initialize. [...]