Important:
- Please ensure to first update Analog Lab to version 5.12.6.6914 before upgrading your AstroLab
New Features
Sound Edit: Tweak and edit individual instruments parameters for sound design or fine tuning
New Content
- New Sampled Piano
- 67 Factory presets
- New list of "ready to play" presets
- MiniFreak V5 compatibility
Improvements
Audio Improvements
- Synthx polyphony and performances
- Sampler polyphony and performances
- Sampler voice management is now rotating
Performances
- Updates are now properly handled
- Link stability
- File transfer stability
UX
- Improved AstroLab version display
Wi-Fi
- Wi-Fi country selector
Bugfixes
- No more stuck notes when using MIDI mergers or workstations
- Aux 1 & 2 preferences are now saved after a reboot
- Synclavier now makes the correct sound on the first notes pressed
- No more stuck notes when playing a preset in mono legato while using the sustain pedal
- Pressing the Playlist button now recalls the last loaded playlist
- Exiting Playlist now recalls the last loaded preset
- Adding a preset to a Playlist does not reload another preset
Install Analog Lab on your computer (Mac or Windows) and connect AstroLab with a USB cable. In Analog Lab open Settings (cogwheel), pick your AstroLab under AstroLab Settings and click Update next to the firmware version. Choose to update directly from Arturia's servers, or install an update file ending in .astro that you have already downloaded from the AstroLab downloads page. Leave the computer and AstroLab alone until both progress bars finish: the update can take a long time and the keyboard may restart several times. If the update is interrupted and AstroLab shows a blue screen or starts in Service Mode, switch it off with the USB cable connected, switch it on while holding Oct- and Oct+, short-press both again right before the Arturia logo appears, reopen Analog Lab and run Update again.
What you need
Analog Lab — the software Arturia uses to load firmware onto the Arturia AstroLab 61. Download links below.
9 releases since Apr 2024, roughly one every 4 months.
Changelogs summarised from the manufacturer's release notes.
Version 2.0.0 — 1 Oct 2026
Release notes for this version are listed above.
Version 1.7.0 — 26 Feb 2026
New Features
- Added compatibility for Pigments 7
- Added compatibility for MiniFreak V4
- Delete Unused Samples
- Delete User Content
Improvements
- Overall stability improvement
Version 1.6.0 — 19 Nov 2025
New Feature
- New Panic shorcut " shift + up + down arrows "
Improvements
- Improved some Factory presets
Bugfixes
- Fixed a crash on Augmented PIANO
- Fixed stuck notes on OP-Xa V when using sustain pedal
- Fixed a recall issue that was happening when going from a multi to a single preset while linked to Analog Lab
- Having a tooltip displayed no longer blocks user actions
- Pedal polarity is no longer affected by settings initialization
Version 1.5.0 — 15 Jul 2025
Important:
- Please ensure to first update Analog Lab to version 5.12.0.6227 before upgrading your AstroLab
New features:
- Integration of Augmented MALLETS
- Integration of Augmented YANGTZE
- Integration of Jup-8000 V
- Integration of Minibrute V
- Integration of Pure LOFI
- Integration of Synthx V
- Integration of SEM V3
- AstroLab can now send Program change to External devices
- Added ARP/CHORD/SCALE Lock to keep the settings while browsing
- New Looper demo files
- New Factory Library
- Transfer Playlist from AstroLab to Analog Lab
Improvements:
- ARP rate is now set to 1/16 by default
- Improved Aftertouch feel
- More infos on the version number in the Utility menu
Bugfixes:
- Piano V no longer drops when playing with sustain pedal
Version 1.4.4 — 9 Apr 2025
Important:
- Please ensure to first update Analog Lab to version 5.11.1.6049 before upgrading your AstroLab
New features:
- Added compatibility for Pigments 6
- Added compatibility for MiniFreak V3
- When linked to AstroLab, Analog Lab and AstroLab effects and keyboard settings are now mirrored
- When linked to AstroLab, macros mirroring is more responsive
- Clicking Part buttons on AstroLab now correctly selects the part in Analog Lab
Improvements:
- Sustain and Hold no longer conflict when used together
Bugfixes:
- No more stuck notes when connected via MIDI to external workstations
- No more missing samples when using Pigments or MiniFreak V
- Wurli presets no longer crashes when using Modwheel
- No more Missing samples on MiniFreak presets
- Incoming MIDI CC are now properly filtered
Version 1.3.5 — 19 Nov 2024
Important:
- Please ensure to first update Analog Lab to version 5.10.7.5324 before upgrading your AstroLab
New features:
- New MIDI Input filter
- 5GHz WIFI networks are now compatible from 5160 to 5340 MHz
Bugfixes:
- Improved stability of updates through Analog Lab
- No more stuck notes when sending MIDI messages from multiples channels
- Program change no longer reacts to all MIDI channels
- Saving a preset with a custom MIDI config no longer kills wheels and pedals
Version 1.3.0 — 17 Sep 2024
Important:
- Please ensure to first update Analog Lab to version 5.10.5.5098 before upgrading your AstroLab
New features:
- Integration of ACID V, Augmented BRASS, Augmented WOODWINDS, Mini V4, MiniFreak V and Wurli V3
- New Presets for added Instruments
- New Artists Tribute Presets
Improvements:
- Improved Polyphony management on Pigments and Augmented Instruments
- Reinforced stability of Piano V audio engine
Version 1.2.9 — 24 Jul 2024
Important:
- Please ensure to first update Analog Lab to version 5.10.3.4852 before upgrading your AstroLab
New features:
- We can now save presets from AstroLab to Analog Lab
- Added Panic button (long press Play + Rec)
- Tick sound setting for the Navigation wheel
- Added FAQ link in the update pop up
- Initialize all Settings available on Analog Lab
Improvements:
- Improved Navigation wheel sensitivity to avoid misclicks
- Tooltips now displayed when turning FX On/Off
- Tooltips for FX are the same than on Analog Lab
- Chord mode works perfectly when playing legato
- Added warning Pop up on WIFI if password is too small
- Improved part creation and edition
- Improved animation when scrolling in Playlists
- Audio from external bluetooth can be controlled with the Master volume knob
- Link with Analog Lab is much faster
- Aftertouch curves have been refined
- Removed latency on Master volume
- Improved Bluetooth audio latency
Bugfixes:
- No more crash when transferring presets from Analog Lab
- External MIDI synchronization is more stable
- CZ V now sounds correct on first note press
- Bluetooth audio is no longer detuned
- Macros are now updated when going out of Playlists
- Big Playlists no longer create visual lag when browsing
- No more issues when saving inside a Playlist
- Preset is now correctly loaded when pressing the playlist button
- Various UX fixes (Adding more popups and tooltips and UI corner cases)
- User samples are now correctly sent when transferring custom presets
Version 1.1.6 — 5 Apr 2024
Important:
- Please ensure to first update Analog Lab to version 5.10.0.51 before upgrading your AstroLab
New features:
- Added Knob Send CC option in MIDI Settings
- Scales are now displayed with the Keyboard LEDs
- Chord and Hold button are now lit in blue when activated
- Scales no longer steal notes when playing
- Semitones Transpose now shows feedback on screen and Octave LEDs
- Aftertouch and Velocity resolution have been improved
- Added a Demo Playlist
- Added Integration and Link with Analog Lab
Improvements:
- Improved Multi creation workflow
- Improved navigation and user experience
- Improved preset filtering
- Improved all instruments stability
- Improved Keyboard LEDs behavior
- Improved default Playlist and Song names
- Renamed Leslie Speed to FX A/B Rotary Speed in Pedal Functions
- FX A/B Rotary Speed now controls both Insert FX when assigned to Aux Pedals
- Keeps modifications on Playlists presets when re-entering Playlist mode
Bugfixes:
- When Click to Load is on, turning the Navigation Wheel no longer goes back to the top of the list
- WIFI is now able to connect to public networks
- Going from one Song to the next now works perfectly
- No more stuck notes
- MIDI CC are now sent and received perfectly
- Added missing images for artists tributes
- No more sustained notes when stopping the Looper
- It is now possible to cycle through Songs even if one Song is empty
- Navigating Songs with Aux pedals now works perfectly
- Looper now recalls everything correctly after a reboot
- Next/Previous preset when controlled with AUX pedals now changes presets from any screen
- Custom Chords, when created on a split Multi, now plays the same Chord for both Parts
- Liked preset no longer disappear when changing parts
- Improved Clavinet's Movement Macro
- In Playlist mode, Parts can no longer be edited or added
- Modular preset no longer cut the sound when using a sustain pedal
Arturia AstroLab 61 firmware FAQ
What is the latest firmware for the Arturia AstroLab 61?
The latest firmware for the Arturia AstroLab 61 is version 2.0.0, released on 1 Oct 2026. FW//RADAR last checked Arturia's official page on 17 Nov 2026.
How do I update the Arturia AstroLab 61?
Install Analog Lab on your computer (Mac or Windows) and connect AstroLab with a USB cable. In Analog Lab open Settings (cogwheel), pick your AstroLab under AstroLab Settings and click Update next to the firmware version. Full instructions on Arturia's official firmware page.
What software do I need to update the Arturia AstroLab 61?
You need Analog Lab, available from arturia.com.
Where can I download Arturia AstroLab 61 firmware and drivers?
Directly from Arturia's official firmware page — FW//RADAR links to the source and never hosts firmware files. Official firmware page →