Skip to content

Intellijel Planar 2 firmware

Intellijel active Device launched 2018
Get alerts for new Planar 2 firmware
Free · one message per release

Latest firmware

1.3.1.0
released 25 Jul 2024
Open web updater runs in the browser

What's new in 1.3.1.0

- Fixed: Reduced SENSE jitter from slow joystick movements.

Last checked 27 Oct 2026

Release notes on intellijel.github.io ↗

What you get with a free account

  • An alert the day a new Planar 2 firmware ships, by email, Telegram or push
  • Your whole rig in one place, with the version each device is on
  • Used and new Reverb prices for your gear
  • A public rig page to share, if you want one

We check Intellijel's official download page for the Intellijel Planar 2 every day. One message per release. No spam, no newsletter.

Sign in, it’s free →

How to update the Intellijel Planar 2

Connect Planar 2 via USB in bootloader mode (hold the rotary encoder while powering on the module). Open intellijel.github.io/firmware/ in Chrome, Edge, or Opera, select Planar 2 from the dropdown, and click Update. The flash takes under a minute via WebUSB.

What you need

Intellijel Web Firmware Updater — the software Intellijel uses to load firmware onto the Intellijel Planar 2. Download links below.

Just for reference. For complete and up-to-date instructions, always refer to the manufacturer's official firmware page.

Drivers & software for the Intellijel Planar 2

The Intellijel Planar 2 is updated with Intellijel Web Firmware Updater, published by Intellijel.

Download Intellijel Web Firmware Updater from Intellijelopens in a new tab — intellijel.github.io

Sign in to see Reverb prices →

Intellijel Planar 2 firmware update history

9 releases since Jul 2018, roughly one every 9 months.

Changelogs summarised from the manufacturer's release notes.

Version 1.3.1.0 — 25 Jul 2024

Release notes for this version are listed above.

Release notesopens in a new tab — intellijel.github.io

Version 1.3 — 3 Apr 2024

- Tweak: Looper, Controls, and all CV I/O operate at vastly higher sample rates. - Tweak: Adjusted filtering on X/Y for smoother response. - New: Boot toggle (Hold "Loop" on Boot) to enable 1.2.4's ramped looping behaviour. - GATE and PLAY Buttons will flash once when ENABLED. - PLAY and REC Buttons will flash once when DISABLED. - Fixed: Ramping behaviour. - Note: Saved state will be reset with this update (modes and toggles).

Version 1.2.5 — 17 Aug 2023

- Removes slew/interpolation when reaching the end of a loop. - No other changes, use 1.2.4 if you enjoy the ramped looping behaviour.

Version 1.2.4 — 17 Oct 2021

- Adjustments to all CV modes behaviour/scaling.

Version 1.2.3 — 8 Oct 2021

- Minor adjustment to Sense detection.

Version 1.2 — 5 Oct 2021

- 8x loop Time (~4min). - Support for the Gx Expander (A/B/C/D on 1/2/3/4, N/S on 5/6 and E/W on 7/8). - Noise reduction on inputs and outputs. - Other bug fixes. - Updated manual available at intellijel.com/support.

Version 1.02 — 27 Jul 2019

- Fix shortened loop times.

Version 1.01 — 28 Feb 2019

- Fix mixer bleed. - Fix looper glitch.

Version 1.00 — 27 Jul 2018

- Initial release.

Tracked in 1 rig on FW//RADAR.

Intellijel Planar 2 firmware FAQ

What is the latest firmware for the Intellijel Planar 2?

The latest firmware for the Intellijel Planar 2 is version 1.3.1.0, released on 25 Jul 2024. FW//RADAR last checked Intellijel's official page on 27 Oct 2026.

How do I update the Intellijel Planar 2?

Connect Planar 2 via USB in bootloader mode (hold the rotary encoder while powering on the module). Open intellijel.github.io/firmware/ in Chrome, Edge, or Opera, select Planar 2 from the dropdown, and click Update. Full instructions on Intellijel's official firmware page.

What software do I need to update the Intellijel Planar 2?

You need Intellijel Web Firmware Updater, available from intellijel.github.io.

Where can I download Intellijel Planar 2 firmware and drivers?

Directly from Intellijel's official firmware page — FW//RADAR links to the source and never hosts firmware files. Official firmware page →

Is the Intellijel Planar 2 still receiving firmware updates?

The last firmware release we recorded is 1.3.1.0 from 25 Jul 2024. FW//RADAR still checks Intellijel's page daily.