Skip to content

Arturia KeyLab 61 mk3 firmware

Arturia active Device launched 2024
Get alerts for new KeyLab 61 mk3 firmware
Free · one message per release

Latest firmware

1.5.1
released 16 Oct 2026
Get Analog Lab includes the firmware · release notes on arturia.com

What's new in 1.5.1

Bug fixes - Keylab mk3 88: Fixed a bug that triggered random notes when playing specific chords.

Last checked 16 Nov 2026

Release notes on arturia.com ↗

What you get with a free account

  • An alert the day a new KeyLab 61 mk3 firmware ships, by email, Telegram or push
  • Your whole rig in one place, with the version each device is on
  • Used and new Reverb prices for your gear
  • A public rig page to share, if you want one

We check Arturia's official download page for the Arturia KeyLab 61 mk3 every day. One message per release. No spam, no newsletter.

Sign in, it’s free →

How to update the Arturia KeyLab 61 mk3

Install Analog Lab on your computer (Mac or Windows) and connect the KeyLab 61 mk3 with a USB cable. Open Analog Lab: if the keyboard firmware is out of date, Analog Lab prompts you to update it. Accept and follow the on-screen steps, and do not disconnect the keyboard until the update has finished. If the update fails or is not offered, use Arturia MIDI Control Center instead: connect the keyboard, open MIDI Control Center and run the firmware update from there.

What you need

Analog Lab — the software Arturia uses to load firmware onto the Arturia KeyLab 61 mk3. Download links below.

Just for reference. For complete and up-to-date instructions, always refer to the manufacturer's official firmware page.

Drivers & software for the Arturia KeyLab 61 mk3

The Arturia KeyLab 61 mk3 is updated with Analog Lab, published by Arturia.

Download Analog Lab from Arturiaopens in a new tab — arturia.com

Sign in to see Reverb prices →

Arturia KeyLab 61 mk3 firmware update history

8 releases since Aug 2024, roughly one every 4 months.

Changelogs summarised from the manufacturer's release notes.

Version 1.5.1 — 16 Oct 2026

Release notes for this version are listed above.

Version 1.5.0 — 11 May 2026

Bug fixes - The sustain pedal has been stabilized to prevent sudden unexpected value drops (from 127 to 0) while playing. - Improved pedal detection range to make it compatible with most pedal after a factory reset. - Playing legato will no longer unexpectedly kill your notes when Chord, Arp, and Hold functions are all activated simultaneously. - Fixed a bug where stuck notes would occur when playing glissando or palm slide. - Fixed a bug where stuck notes would occur when playing while ajusting Strum values in Chord mode. - Fixed a bug where wheels & pedals were unexpectedly hard mapped to CH1 in Arturia mode. Improvements - Enhanced the UX for the Edit Preset Parts tab. - Refreshed the Keyboard Settings tab with UX improvements. - Button layouts have been refreshed, and new dedicated screens for managing Parts have been added. - Added a Part edition menu. - Rearranged internal menus for more consistency. - Added newest V Collection instrument icons.

Version 1.3.7 — 5 May 2026

Version 1.3.8 — 5 May 2026

Version 1.2.1 — 12 Jan 2026

Bug fixes - KeyLab mk3 88: fixed the velocity issue on some keys.

Version 1.2.0 — 16 Dec 2025

Bug fixes - Improved responsiveness of sustain, expression and auxiliary pedals. - Fixed a key latency issue that could occur when using the sustain pedal. - Scale mode: fixed an issue where the sound would cut out when a key outside the scale was remapped to a note currently in use. - Fixed a bug where unwanted sustain pedal messages could be sent in the MIDI OUT and USB ports. - Fixed a stuck note when using Chord + Scale when played legato. - Keylab mk3 88: fixed a graphical issue where recording a scale shows an offset of 3 semitones. - Keylab mk3 88: fixed an unwanted note sent while playing a specific chord.

Version 1.1.1 — 2 Dec 2024

Bug fixes - No more crash when sending an external clock outside the 30 to 300 BPM range. - The Keyboard Aftertouch Sens. settings is now working as expected. - No more stuck notes when activating the Chord Mode while holding a key. - Pitch Wheel, Mod Wheel & Pads are now sending messages on MIDI port, no matter which program is used. - In DAW program, Pedals messages are now sent on MIDI port instead of DAW port. - Hold feature don't create short delay on notes anymore. - No more inconsistent states for pads LEDS. - Keyboard Velocity & Aftertouch curves are improved in order to reach the full range more easily. - No more MIDI Control Center lag when connected to KeyLab mk3. - Transpose & Octave buttons are now working when connected to a DAW script, with DAW program loaded. - Chords mode : Spread Aftertouch + Strum are now working as expected. - No more Stuck notes when using Down, Alt Down & Random Chord types. - Sustain Pedal is now set to Control type by default. - Fixing ARP + HOLD behavior when using MIDI parts. Improvements - In Program menu, User program can now be placed on an empty slot. - The custom curves feature can now be tested in real time. - "Auxiliary Input" is now called "Aux Pedal". - Improved pop-ups behavior in scale menu. - Aux Pedal, Encoder Acceleration, Pads General settings & Pads sensitivity are now Global parameters, accessible with Arturia & DAW program too via Settings > Global tab. - Various improvements on internal MIDI FX.

Version 1.0.4 — 14 Aug 2024

Bug fixes - Fixed the split point feature when using Analog Lab integration. - Changing Scale value while using Arpeggiator doesn't cut the sound anymore. - Fixed Sustain pedal messages when MIDI parts are deactivated. - Fixed the Lowest & Highest key recall on Midi part settings. - Added the Augmented Yangtze logo in firmware database. - Fixed split point pop up duration when using Analog Lab integration. - Fixed the Encoder relative widget. Improvements - Improving the Arpeggiator Random ranges and the random all feature. - Improving the Chord + Scale + Arpeggiator behaviour when used together. - Improving colour picker on PADS to see the change in real time. - Improving touch sensitive behavior in menu.

Arturia KeyLab 61 mk3 firmware FAQ

What is the latest firmware for the Arturia KeyLab 61 mk3?

The latest firmware for the Arturia KeyLab 61 mk3 is version 1.5.1, released on 16 Oct 2026. FW//RADAR last checked Arturia's official page on 16 Nov 2026.

How do I update the Arturia KeyLab 61 mk3?

Install Analog Lab on your computer (Mac or Windows) and connect the KeyLab 61 mk3 with a USB cable. Open Analog Lab: if the keyboard firmware is out of date, Analog Lab prompts you to update it. Full instructions on Arturia's official firmware page.

What software do I need to update the Arturia KeyLab 61 mk3?

You need Analog Lab, available from arturia.com.

Where can I download Arturia KeyLab 61 mk3 firmware and drivers?

Directly from Arturia's official firmware page — FW//RADAR links to the source and never hosts firmware files. Official firmware page →

Where can I find the Arturia KeyLab 61 mk3 manual?

The official Arturia user manual is a PDF hosted on dl.arturia.net. Arturia KeyLab 61 mk3 user manual (PDF) →